How To Set Up Eufy Robovac
eufy RoboVac
Important Condom Instructions
To reduce the chance of injury or damage, read these safety instructions advisedly and continue them at manus when setting upwardly, using, and maintaining this device.
Alert SYMBOLS USED
This is the safety warning symbol. This symbol alerts you lot to potential hazards that could event in property damage and/or serious bodily harm or death.
- This device tin be used by children aged from 8 years and to a higher place and persons with reduced physical, sensory or mental capabilities or lack of experience and noesis if they have been given supervision or pedagogy concerning use of this device in a safe way and understand the hazards involved.
- Children should exist supervised to ensure they practise not play with this device.
- Cleaning and maintenance shall not exist performed past children without adult supervision.
- This device is only to be used with the ability supply unit provided.
- Before cleaning or maintaining this device, the plug must be removed from the socket-outlet.
- The battery in this device should simply be replaced by a skilled professional.
- When removing the battery, disconnect the device from the supply mains.
- For the purposes of recharging the bombardment, just utilize the detachable ability supply unit provided with this device.
- The battery must be removed from this device earlier this device is tending of. To remove the battery from this device, first remove the screws on the lesser, then remove the main PCB and unscrew the battery cover using a screwdriver. Remove the battery by disconnecting the quick connector.
- The used battery should be placed in a sealed plastic bag and disposed of safely according to local environmental regulations.
- The external flexible cable or cord of the power supply unit cannot be replaced; if the cord is damaged, the power supply unit shall be disposed of.
- This device is for indoor use simply. Practise not utilise outdoors or on wet surfaces.
- This device is non a toy. Practice not sit down or stand on this device. Small-scale children and pets should be supervised when this device is operating.
- Store and operate this device in room temperature environments only.
- Clean with a cloth dampened with water but.
- Practise not utilize this device to pick up anything that is burning or smoking.
- Do not use this device to pick up spills of bleach, paint, chemicals, or annihilation wet.
- Before using this device, choice up objects similar article of clothing and loose paper. Lift upwardly cords for blinds or curtains, and move ability cords and fragile objects out of the way. If this device passes over a power string and drags it, an object could be pulled off a table or shelf.
- If the room to be cleaned has a balcony, a physical barrier should be used to forestall access to the balcony and to ensure safe performance.
- Do not identify annihilation on top of this device.
- Be aware that this device moves effectually on its own. Take care when walking in the area where this device is operating to avoid stepping on it.
- Do not operate this device in areas with exposed electric outlets on the flooring.
- Exercise not betrayal the electronics of this device, its battery, or the integrated Charging Base of operations. There are no user serviceable parts inside.
- Do non utilize this device on an unfinished, unsealed, waxed or rough floor. Information technology may outcome in damage to the floor and this device. Apply only on hard floor surfaces or depression-pile carpet.
- This device has been designed to be used on floors without scratching them. We still recommend that y'all test this device on a pocket-size area of the room to be cleaned to ensure no scratches are made before cleaning the whole room.
- Only use attachments recommended or described in this manual.
- Exercise non handle the appliance or plug with wet hands.
- Ensure that the dust bag and/or filters are in place before usage.
- Do not utilise a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable beliefs resulting in burn down, explosion or risk of injury.
- Exercise non expose the battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature higher up 130°C may cause explosion.
- Do not modify or effort to repair the appliance or the battery pack (equally applicable), except as indicated in the instructions for utilize and care.
- Follow all charging instructions and exercise not charge the bombardment pack or apparatus outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may impairment the battery and increment the take chances of fire.
Notice
This symbol on the device or its packaging indicates:
Do not dispose of electric appliances as unsorted municipal waste material; utilize separate collection facilities. Contact your local authority for information regarding the collection systems bachelor. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-existence. When replacing old appliances with new ones, the retailer is legally obliged to have back your quondam apparatus for disposal at to the lowest degree free of accuse.
FCC Statement
This device complies with Office 15 of the FCC Rules. Operation is subject to the post-obit 2 conditions: (1) This device may not cause harmful interference, and (2) this device must have any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved past the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Role 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and tin can radiate radio frequency energy and, if non installed and used in accordance with the instructions, may cause harmful interference to radio communications. Yet, there is no guarantee that interference volition non occur in a detail installation. If this equipment does cause harmful interference to radio or television reception, which can exist determined by turning the equipment off and on, the user is encouraged to endeavour to right the interference by one or more than of the following measures: (one) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (iii) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/ TV technician for help.
ISED Compliance Statement
This device contains license-exempt transmitter(southward)/ receiver(s) that comply with Innovation, Science and Economical Development Canada'due south license-exempt RSS(southward).
Functioning is discipline to the following two conditions:
1. This device may not cause interference.
two. This device must accept whatever interference, including interference that may cause undesired operation of the device.
RF Exposure Compliance Statement
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Declaration of Conformity
This production complies with the radio interference requirements of the European Community. Hereby, Anker Innovations Limited declares that the radio equipment type T2251 is in compliance with Directive 2022/53/European union. The full text of the European union declaration of conformity is available at the following internet address: https://www.eufylife.com/.
Maximum output power: 18 dBm
Frequency ring: ii.4G ring (2.4000GHz – two.4835GHz)
Contains FCC ID 2ANDL-WR1 Contains IC: 23243-WR1
Trademark Notice
- Amazon, Echo, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
- Apple tree and the Apple logo are trademarks of Apple Inc., registered in the U.Due south. and other countries. App Shop is a service mark of Apple Inc., registered in the U.Due south. and other countries.
- Google Play and the Google Play logo are trademarks of Google Inc.
- Google Dwelling house is a trademark of Google Inc.
Nearly Your RoboVac
What'due south in the Box
RoboVac Anatomy
A. Acme & Side
B. Bottom
C. Dust Collector
D. Suction Inlet
Due east. Charging Base
 |  | Start/Intermission Cleaning
|
 | Return to Charging Base
| |
 | Spot Cleaning
|
 (Wi-Fi Status Light) | Status |
| Slowly flashing blue | Waiting for connection |
| Rapidly flashing blue | Connecting with your wireless router |
| Solid blue | Connected to your wireless router |
Using Your RoboVac
Important Tips Before Use
A. Remove power cords and modest objects from the floor that may entangle RoboVac. You can use the supplied cable ties to organize your wires and power cords.
B. Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid cleaning very night-colored loftier-pile rugs or rugs thicker than 1.02 in/26 mm as they may cause RoboVac to malfunction.
C. Go along RoboVac abroad from spaces lower than 2.87 in/73 mm to forbid RoboVac from getting stuck. If necessary, place a physical barrier to block off the problem areas.
D. Keep RoboVac abroad from wet areas.
E. RoboVac may climb on meridian of objects less than 0.63 in/xvi mm in height. Remove these objects if possible.
F. Anti-drop sensors volition prevent RoboVac from tumbling down stairs and steep drops in most cases. Sensors are less effective if muddy or used on carpeted/reflective/very nighttime-colored floors. It is recommended to employ the Boundary Strip(south) to block off areas where RoboVac may fall.
Identify concrete barriers or Boundary Strips in front end of fireplaces and areas that may cause damage to RoboVac if entered.
Training
- Remove the cream blocks beside the bumper earlier use.
- Install the side brush before use.
- Plow on the main power switch at the correct side of RoboVac.
- Place the Charging Base on a level surface and against a wall.
- Remove objects within iii ft/1 thousand of the left and correct side and within 6 ft/2 m of the front end of the Charging Base. If yous cannot remove the objects, bank check whether RoboVac tin render to the Charging Base of operations usually; if not, contact eufy customer service for help.
- Connect the round connector of the adapter into the power socket on the Charging Base and the other end into a wall outlet.
► When the Charging Base connects to Air conditioning power, the LED indicator on the Charging Base is SOLID WHITE.
- Install the Charging Base in a location that RoboVac can easily access. It is recommended to place the Charging Base against a wall, and on a hard-level surface rather than on rugs or carpets.
- Always keep the Charging Base plugged in, otherwise RoboVac will non automatically render to information technology.
Accuse Your RoboVac
- RoboVac has a pre-installed rechargeable battery that has to be fully charged before use.
- RoboVac returns to the Charging Base at the cease of a cleaning bike or when its battery is running low.
Method i: Attach RoboVac to the Charging Base of operations by aligning its charging pins with the charging pins on the base of operations.
Method two: Pres 
on the torso to return RoboVac to the Charging Base.
- Plow off the master power switch if RoboVac will non be used for a long period of time. To preserve the battery's lifespan, recharge at least once every 6 months.
Use Your RoboVac with the EufyHome App
To bask all available features, it is recommended to control your RoboVac via the EufyHome app.
Before y'all start, make sure that:
- Your smartphone or tablet is continued to a Wi-Fi network.
Your smartphone or tablet is running iOS ix.0 (or above) or Android iv.4 (or higher up). - The two.4GHz ring wireless signal is enabled on your wireless router.
The Wi-Fi status light on RoboVac is slowly flashing bluish. - RoboVac is attached to the Charging Base of operations to ensure information technology has plenty power during setup.
- Download the EufyHome app from the App Store (iOS devices) or Google Play (Android devices)
- Open up the app and create a user business relationship.
- Tap the"+" icon to add RoboVac to your EufyHome account.
- Follow the instructions in the app to set up the Wi-Fi connexion.
– Afterward connecting successfully, you can command RoboVac via the app.
– With the app, you lot can select a cleaning manner, ready the time, schedule a cleaning, view the system status, receive notifications and access additional features .
Wi-Fi Status Low-cal
| | Slowly flashing blue | Waiting for connection |
| Apace flashing blue | Connecting with your wireless router | |
| Solid blueish | Connected with your wireless router |
- If you have any bug during the Wi-Fi setup process, refer to the "Troubleshooting> Wi-Fi connection" department in this Transmission.
- If RoboVac gets stuck in any space, tap Observe My Robot in the app to detect the machine.
Restore Manufactory Settings
Press and concord 
on RoboVac for ten seconds to restore factory settings if necessary.
– You will hear a voice prompt when the settings take been reset and the Wi-Fi status light will slowly flash blue. Now you can follow the Wi-Fi instructions in the EufyHome app to prepare the Wi-Fi connexion.
Schedule Cleaning
With the EufyHome app, you can schedule RoboVac to start cleaning at a particular time.
- You can set up the time and customize the cleaning schedules from Sunday to Sat on the EufyHome app. This function is bachelor in the app only.
Starting time/ Break Cleaning
-
Make certain the primary power switch at the side of RoboVac is turned on before use. - You tin likewise start or interruption cleaning via the EufyHome app.
- Press on RoboVac to start cleaning in Auto Mode.
- Press again to pause cleaning.
Select a Cleaning Mode
Auto-cleaning
After startup, RoboVac moves from the Charging Base of operations and automatically determines its cleaning route, following a bow-shaped cleaning method. When the entire clean is finished, RoboVac automatically returns to the Charging Base.
Press on RoboVac to get-go cleaning in Automobile Mode.
- In the EufyHome app, RoboVac can be set to render to the Charging Base automatically if the battery level becomes low. Once recharged, RoboVac will resume to end the remaining cleaning.
- By default, RoboVac starts in Auto cleaning mode when it is turned on.
Spot cleaning
RoboVac intensively cleans a specific surface area in a spiral pattern, useful if in that location is a full-bodied area of grit or droppings. In Spot style, RoboVac volition finish cleaning after two minutes.
Press 
on RoboVac to showtime cleaning in Spot Mode.
Select a Suction Power Level
In the EufyHome app, select a suction power level co-ordinate to your needs:
- Standard (Default)
- Turbo
- Max
- BoostlQ™
- When RoboVac starts cleaning the next fourth dimension, it will clean according to the suction power level you previously selected.
Select BoostlQ™ feature
In the EufyHome app, select the BoostlQ™ feature according to your needs. While cleaning at standard suction power level, RoboVac volition automatically increase the suction power if it detects that stronger ability is needed to ensure the best clean.
BoostlQ™ is ideal for cleaning thicker carpets and hard-to-sweep messes, which will reduce the full cleaning time, just increment the noise level. If the vacuuming dissonance caused past BoostlQ™ disturbs you lot, y'all can disable this feature.
Utilise the Boundary Strip
With the Boundary Strip, you lot can proceed RoboVac away from whatever area or item you exercise not desire RoboVac to clean. RoboVac will recognize the Boundary Strip and volition not cross into the blocked-off area.
- Identify the expanse or item you do not want RoboVac to get shut to.
- If necessary, apply scissors to cut the Boundary Strip to a shorter length. Be sure to correctly measure the length earlier cutting.
- Apply the supplied strips of adhesive tape to lay the Boundary Strip apartment on the flooring. Make sure the strip is placed FLAT on the floor or under an surface area rug.
- When RoboVac starts cleaning the next fourth dimension, it volition clean according to the suction ability level you previously selected. , If the Boundary Strip is rolled up, remove and then re-utilise on the floor with adhesive tape. Otherwise, the Boundary Strip may not piece of work well.
- Make certain the Boundary Strip is placed on the same surface plane RoboVac is used on.
- Be conscientious not to damage the floor when using adhesive record. It is not recommended for use on carpets.
- Keep the Boundary Strip away from objects that emit excessive rut.
Use Your RoboVac with Amazon Alexa/ the Google Assistant
Amazon Alexa or the Google Assistant is a smart voice control device that enables you to control RoboVac with your vocalization.
Currently this feature just supports English, German language, French, and Spanish. Y'all could check regularly if more languages are supported at https://www.eufylife.com/support/.
Before you start, make sure that:
- RoboVac is fastened to the Charging Base to ensure there is enough ability.
- RoboVac is continued with the EufyHome app.
- You have an Amazon Alexa-enabled device (i.due east. Amazon Echo, Echo Dot and Amazon Tap, Repeat Bear witness, Echo Spot) or a device enabled with the Google Assistant (i.eastward. Google Home, Google Dwelling Mini). These devices are sold separately.
- The Amazon Alexa app or Google Habitation app is already installed on your smart device, and you have created an business relationship.
To control RoboVac with Amazon Alexa or the Google Assistant
- Open up the EufyHome app and find "Smart integrations" in the top left.
- Follow the on-screen instructions to complete the setup.
- For more information about how RoboVac works with Amazon Alexa/ the Google Assistant, visit https://www.eufylife.com/support/ for details.
Cleaning and Maintenance
For optimal performance, follow the instructions below to clean and maintain RoboVac regularly. The cleaning/replacement frequency will depend on your usage habits of RoboVac.
Recommended cleaning/replacement frequency
| RoboVac Part | Cleaning Frequency | Replacement Frequency |
| Grit Collector | After each use | – |
| Filter | Once every week ( Twice a calendar week if yous have a pet) | Every 2 months |
| Side Castor | Once every month | Every 3-6 months (or when visibly worn) |
| Rolling Brush | Once every week | Every 6 -12 months |
| Castor Guard | Once every calendar month | Every iii-half dozen months (or when the silicone safe strip on the brush baby-sit becomes visibly worn) |
| Sensors | Once every month | – |
| Charging Pins | Once every month | – |
| Swivel W heel | In one case every month | – |
Clean the Grit Collector and Filter
- Press the dust collector release button to pull the dust collector out.
- Open and empty the dust collector
- Remove the filter.
- Tap the filter to remove dust
- Identify the filter back into the dust collector.
- Push the dust collector back into the primary unit.
Make clean the Rolling Brush
- Pull the release tabs to unlock the castor baby-sit as shown.
- Lift the rolling castor to remove.
- Clean the rolling brush with the provided cleaning tool or a vacuum cleaner.
- Reinstall the rolling castor past inserting the fixed protruding end beginning and so clicking it into place.
- Press downward to snap the brush baby-sit into place.
Make clean the Side Brush
Foreign substances, such as hair, tin easily become tangled in the side brush, and dirt may adhere to it. Be sure to make clean it regularly.
- Remove the side castor.
- Carefully unwind and pull off any hair or string that is wrapped between the main unit and the side castor.
- Use a cloth dampened with warm water to remove dust from the castor or to gently reshape it.
Only utilise the side brush when it is completely dry.
Replace the Side Brush
The side castor may become aptitude or damaged subsequently being used for a period of time. Follow the instructions below to replace it.
- Pull off the old side castor and snap the new ane into identify.
Make clean the Sensors and Charging Pins
To maintain the all-time performance, clean the drop sensors, path tracking sensor and charging pins regularly.
- Be careful not to make the path tracking sensor dirty by touching information technology with your hands.
- Do not make clean the path tracking sensor with sharp-pointed objects, equally it may damage the sensor.
Clean the Swivel Wheel
Pilus or dust particles tin easily go entangled in the swivel wheel. Be certain to make clean the swivel wheel periodically and as needed.
- Remove the swivel bike.
- Make clean any hair or debris wrapped around the wheel or entangled within the cycle cavity.
- Reinstall the bicycle and button in until it clicks into identify.
- Practise not clean the hinge wheel with water
Troubleshooting
| Issues | Solutions |
| RoboVac cannot be activated. |
|
| RoboVac stops working suddenly. |
|
| You cannot schedule cleanings |
|
| Suction power is weak. |
|
| RoboVac cannot be charged. |
|
| RoboVac cannot return to the Charging Base of operations . |
|
| RoboVac's movements or travel paths are abnormal. |
|
| RoboVac's cleaning fourth dimension becomes shorter or is less than 100 minutes. |
|
| RoboVac cannot connect to a Wi-Fi net work. |
|
| You cannot control RoboVac with Amazon Alexa. |
|
| You lot cannot control RoboVac with the Google Assistant. |
|
Voice Alert
When an error or outcome occurs, the red indicator on RoboVac will wink and you lot volition hear a specific voice prompt. Follow the voice prompt to solve the problem.
| Phonation Prompt | Cause and Solution |
| Error ane: Front bumper stuck | Front bumper is stuck. Tap it repeatedly to remove any dust; if not, and so move the device to a new position and try once more. |
| Mistake two: Cycle stuck. Cheque the wheel and move information technology to a new position | Wheel may be stuck or trapped. Articulate whatever obstacles in the surrounding area and check the bicycle for any t rapped dust. Move the device to a new position and try once again. |
| Mistake four: Rolling brush stuck . Remove and make clean the rolling brush | Remove the rolling brush, roller joint, roller brush cover, and suction inlet to make clean it. Once cleaned, place the items back into the device and try again. |
| Error 5: Device trapped. Clear the surrounding surface area | Device is trapped. Articulate whatever obstacles in the surrounding area and try again. |
| Mistake 6: Device trapped. Identify device nearly t he position where the problem occurred. | Device may be suspended in air. Motility information technology to a new position shut to the original position and attempt again If the device is all the same unable to start, clean the border sensor and endeavor again . |
| Error seven: Wheel suspended Please move the device to a new position | Wheels may exist suspended in air. Move the device to a flat surface and a new position close to the original position and then endeavor again. |
| Error 8: Low bombardment, shutting downward device. Delight charge your device | Low Battery; organisation will shut down. Charge the device and try again. |
| Error 9: Magnetic Purlieus Strip detected. Motion device to a different area | Device is too close to a strong magnetic field or strip. Move the device to a different area and endeavor again . |
| Error 21: Charging Base blocked past surrounding obstacles | Charging base of operations is blocked by obstacles, articulate any obstacles effectually the charging base and try again . |
| Error S1: Battery Mistake. Refer to Owner's Transmission or App for help |
|
| Mistake S2: Bicycle Module Error. Refer to Possessor'southward Manual or App for aid |
|
| Error S3: Side Brush Error. Refer to Owner'southward Manual or App for help |
|
| Error S4: Suction Fan Fault. Refer to Owner's Manual or App for help |
|
| Error SS: Rolling Brush Fault. Refer to Possessor'southward Manual or App for help |
|
| Fault SS : Path Tracking Sensor Fault. Refer to Owner's Manual or App for help |
|
Wi-Fi Connectedness
Before Wi-Fi setup, make sure RoboVac and your Wi-Fi network run into the following requirements.
Wi-Fi Setup Requirements
- RoboVac:
- RoboVac is fully charged and the chief ability switch at the side of RoboVac is turned on.
- Wi-Fi status light slowly flashes blue.
- Wi-Fi Network:
- Utilise the correct password for your network.
- Exercise non employ a VPN (Virtual Private Network) or Proxy Server.
- Your Wi-Fi router supports 802.llb/g/n and 1Pv4 protocol.
- You lot are using a 2.4GHz router or a dual-ring router that is configured to support a 2.4GHz frequency band. RoboVac does not back up 5GHz frequency band.
- If RoboVac cannot connect to the Wi-Fi network and yous are using a 2.four/SGHz mixed network, switch to a 2.4GHz network for Wi-Fi setup. You tin switch back once your setup is complete.
- When connecting to a hidden network, make sure y'all enter the right network name, SSID (instance sensitive), and connecting to a 2.4GHz wireless network.
- When using a network extender/repeater, make sure the network name (SSID) and password are the same equally your primary network.
- The firewall and port settings of your Wi-Fi router allow RoboVac to connect with the Eufy servers.
Network Security Requirement - WPA and WPA2 using TKIP, PSK, AES/CCMP encryption.
Wi-Fi Channels - The FCC requires that all wireless devices in the United States operate on the 1-11 wireless spectrum channels.
- Some countries outside North America can use spectrum channels college than aqueduct 11. Refer to your local regulatory agency to decide which channels are accessible.
- A future software release will support admission to channels above 11 for users outside North America. Until then, utilize channels 1-11.
If you lot cannot control RoboVac with your smartphone, try the solutions below to solve the trouble. If the problem persists, contact the Eufy service centre for help.
| Wi-Fi Condition Light | Cause | Solutions |
| Solid blue | RoboVac has connected to your router, but cannot admission the Internet. |
|
| Rapidly flashing blueish | RoboVac cannot connect to your wireless router. |
|
| Slowly flashing blueish | Wi-Fi connexion is reset or has not been fix before. |
|
| Off |
|
|
Specifications
 | Input | 19V==0.6A |
| Battery Volt historic period | 14.4 V == | |
| Power Consumption | 40W | |
| Battery Blazon | 14.4 Five == Li- ion 2600 mAh | |
| Grit Collect or Capacity | 600ml | |
| Cleaning Time | Max. 100 mins | |
| Charging Time | 300 – 360 mins | |
 | Input | 19V == 0.6A 0.half-dozen |
| Output | 19V == 0.6A |
Client Service
For FAQs and more than data, please visit www.eufylife.com.
Email: [email protected]
Live Chat: www.eufylife.com
Customer service hotline:
(US) +1 (800) 988 7973 Mon-Fri 9:00am – 5:00pm (PT)
(U.k.) +44 (0) 1604 936200 Monday-Fri 6:00 -11:00 (GMD
@EufyOfficial
@EufyOfficial
@EufyOfficial
@EufyOfficial
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Documents / Resource
Source: https://manuals.plus/eufy/robovac-manual-pdf
0 Response to "How To Set Up Eufy Robovac"
Post a Comment